Bathymetric Texel Camera: Overview

The following links give more detail than this page.

overall system diagram

Figure 1. CEROS Image Acquisition System Block Diagram

The data collection computer is connected to the embedded controller via an RS-232 serial interface. The data collection computer acquires image data from the CMOS camera via an IEEE1394 (Firewire) interface. The embedded controller connects to the CMOS camera through a camera strobe cable. It also has additional connections to the existing CHARTS system. The first is a One Pulse Per Second (1PPS) signal which is generated by the Applanix POS AV IMU once every second. The second is an RS-232 serial interface which is used to transmit GPS time data coinciding with each 1PPS pulse.

CEROS Project Information