Skip to main content

A Smoother Ride Over Troubled Waters

Aug. 10, 2017 – Boating through choppy waters can be an exciting but physically exhausting experience. Now researchers at Utah State University’s Splash Lab are taking steps toward the design of an inflatable speedboat that absorbs wave energy and provides a smoother ride for passengers.

Their findings were recently published in the Journal of Fluid Mechanics, and for the first time demonstrate the unique differences in water impact behavior of rigid and elastic bodies.

Deformable Sphere

Researchers at USU's Splash Lab are developing the science that will improve
soft-hull watercraft design. Their findings could make a ride over choppy waters
a lot smoother. (Image: Splash Lab)

“Rigid and elastic materials interact with the water surface quite differently,” said Randy Hurd, a Ph.D. candidate at USU and lead author on the study. “When an elastic body impacts the surface, the material deforms and oscillates significantly which changes the water-impact physics compared to a rigid body.”

Hurd’s team used high-speed cameras to record elastomeric spheres dropping into a tank of water. At 2,000 frames per second, the footage revealed the unique splash curtains and air-filled cavities that form after impact. The group used the images to track the position and deformation of the elastic spheres to understand how energy transfers from the water to the material. By analyzing the results, Hurd says his team can accurately predict the water interaction behavior based on the type of soft material and its speed.

“Being able to predict water interaction from a materials perspective is an important first step in understanding which material types would be best for developing an inflatable watercraft capable of providing a smoother ride over a choppy surface,” said Hurd.

The findings are particularly valuable to the U.S. Navy and other agencies that deploy watercraft in rough seas. The Splash Lab team worked alongside the United States Office of Naval Research in Newport, R.I., and with noted materials scientist Dr. Allan Bower at Brown University.

###


Direct Researcher Contact:

Randy Hurd – Dept. of Mechanical and Aerospace Engineering, Utah State University | randyhurd@googlemail.com | cell: 801-735-6173

Dr. Tadd Truscott – Dept. of Mechanical and Aerospace Engineering, Utah State University | tadd.truscott@gmail.com | office: +1-435-797-8246 | @TheSplashLab | splashlab.org

For additional media assistance, contact: Matt Jensen – USU College of Engineering | matthew.jensen@usu.edu | office: +1-435-797-8170 | cell: +1-801-362-0830 | @EngineeringUSU | engineering.usu.edu

Click here for Video and Photo Library

Media outlets are encouraged to use the photo and video content in the media library. Reporter interviews are welcome.